The solar street light market is booming, and a number of key players are stepping up their efforts. In Europe, Philips leads the solar industry, while Yingli Solar, Jiawei, SOKOYO, and Kingsun are paving the way for a bright future. A number of solar street lights are available on the market, with Kingsun and Yingli Solar leading the pack in the Asian market.
Cost
The cost of solar street lights depends on many factors. The initial investment is nearly double that of a traditional street lighting system. The costs are higher for off-grid systems, as they are off-the-grid. The cost is higher for off-grid solar street lights, however. Consider the place where you plan to install them to get an idea of the required lighting level. A small road with minimal traffic flow may not require much illumination, while a busy main road will require more lighting.
LEDs are used as primary lighting in modern solar street lights. LED fixtures produce higher luminosity at lower energy costs. An LED fixture requires 50% less energy than its HPS counterpart. The lack of warm-up time in LED fixtures makes them ideal for use with motion detectors. The LED light fixtures also use batteries to store the electricity generated during the day. The batteries then supply energy to the fixture during the night. The battery’s capacity and life are important factors in determining the lifetime of the light fixture.
While the cost of solar street lights may seem high at first, the investment will pay off in the long run. Installing solar street lights is much more efficient than putting up street lights with conventional energy sources. For the same amount of money, you can install up to 100 solar street lights at a single site. And since these systems produce clean energy, they are environmentally friendly and cost less than traditional lighting. If you plan to install solar street lights in your community, you should consider this as your next investment.
Features
Most solar street lights are powered by LEDs. LEDs are light emitting diodes that produce visible light when they are supplied with a direct current. They typically last 50,000 hours and deliver better brightness at lower energy costs. In addition, LED street lights do not produce any heat and use approximately 50% less energy than traditional street lights. This energy efficiency and reduced maintenance costs help make them an excellent choice for cities and towns. To learn more about LED street lights, read on.
Another advantage of solar street lights is their ease of installation. All you need is a concrete base and stainless steel screw to install them. They can be easily installed and decorated. Unlike conventional street lights, which require complicated relief and expensive auxiliary materials, solar street lights are extremely easy to install and don’t require any wiring. And, unlike traditional street lights, they require no maintenance whatsoever. They simply require a cement base and a stainless steel screw.
Other useful features of solar street lights include the ability to monitor battery power and run a dusk-to-dawn sensor. These lights detect ambient light and automatically switch on their LEDs when the light level drops. They also use a special lens that adjusts their brightness level depending on the battery voltage and running time. This increases their backup time. A solar street light with a motion sensor is an excellent choice.
Energy efficiency
Modern solar street lights use LED as their light source, which provides higher Lumens and lower energy consumption. LED fixtures use 50% less energy than traditional street lights. These lights also don’t require a warm-up time, making them compatible with motion detectors. The light output from a single LED fixture is approximately 85% of that of a traditional HPS fixture. This makes LED fixtures an excellent option for many lighting applications.
The latest designs of solar street lights use wireless technology to control and operate the lights. Solar panels have a higher conversion rate than poly-crystalline panels. A solar street light’s battery is the device that stores the electricity generated by the solar panel during the day. The energy stored in the battery is then supplied to the light fixture at night. The life cycle of the battery and the capacity of its backup battery affect the light’s longevity and the number of backup days.
Modern solar street lights come with a lithium-ion battery and embedded solar panel. They are equipped with battery management systems and night and motion sensors. In addition, these lights also come with a DC controller that protects the battery from damage. A typical solar street light will require no new wiring. A concrete base and battery pit are all that’s needed to install one of these lights. They can be installed in a matter of hours and require little maintenance. The light will be safe for people and the environment, while also producing zero pollution.
Read: Ireland Suspends Astrazeneca Jab Over Blood Clot Fears